Understanding photo requirements
Fix photo upload rejections and size issues
A requirement such as “at most 100 KB and 413 × 531 px” specifies two separate checks. A small file can have the wrong dimensions. Correct dimensions can still produce a file that is too large. These numbers are examples for using the tool.
The default keeps the original pixel dimensions. If compression cannot reach the target, the result shows that the size limit was exceeded. Smaller dimensions require your choice.
Why is my photo rejected when it is under 100 KB
Keep the upload error and the destination's photo requirements open. Work through these checks using the actual byte count and dimensions shown in your PixelFit result.
-
Check the unit and whether the limit is inclusive
At most 100 KB allows 100,000 bytes. Less than 100 KB allows 99,999 bytes. At most 100 KiB allows 102,400 bytes. Compare the actual bytes in the result with your device's rounded size display. Enter the destination's unit and boundary under ‘Units and size limits’.
-
Check width and height in the right order
A requirement of 413 px wide and 531 px high needs 413 × 531 px. A 531 × 413 px image has a different orientation. Choose ‘Set exact width and height’ and check the output dimensions. Requirements in mm, cm or DPI also need the destination's conversion and print specifications.
-
Select the finished JPG file
Choose the file you downloaded with ‘Save JPG’ in the destination's upload picker. Check its extension and modification time in your downloads folder. A result marked ‘File size limit exceeded’ still exceeds the limit when downloaded with ‘Save current result’. Compare the actual bytes with the target KB value included in the filename.
-
Check the crop and visible detail
Exact dimensions crop the image to the requested aspect ratio. Use ‘Adjust crop position’ to keep the face, head and important text in frame, then create the JPG again. Check outlines and lettering with ‘View actual pixels’. Compare the background, face proportions and capture date with the destination's requirements.
-
If the file will not open, check its format and size
PixelFit accepts JPG, PNG and WebP files up to 20,000,000 bytes and 24 million pixels each. Export HEIC photos as JPG on your device before selecting them. Check that the saved file's extension and actual image format are JPG. For a large photo, try a smaller copy exported on your device.
-
When the file checks pass, inspect the upload error
Check the destination's sign-in state, upload completion and filename restrictions. Select the saved file again. If the error continues, contact the destination with its error message and requirements. ID and passport photos also need the issuing authority's official photo specifications and validation process.
Image detail can change at the same dimensions
Pixels define the width and height of an image. JPG compression can simplify colors and details at the same dimensions. Inspect faces, lettering and hair at actual pixel size.
KB and KiB
| Example condition | Maximum file size |
|---|---|
| At most 100 KB | 100,000 bytes |
| Less than 100 KB | 99,999 bytes |
| At most 100 KiB | 102,400 bytes |
Some systems label 1,024 bytes as KB. Check the destination's definition. When the definition is unclear, choosing 1 KB = 1,000 bytes uses the smaller byte limit for the same number.
Set the requirements
- Choose a photo. Enter the file size, unit and inclusive or strict limit from the destination's instructions.
- Keep original dimensions if no dimensions are specified. Otherwise choose exact dimensions and enter the width and height.
- A different aspect ratio crops the photo. Adjust the crop to retain important parts of the image.
- Make the JPG. Check the actual bytes, dimensions and enlarged preview, then save the file.
Worked example for 100 KB and 413 × 531 px
These values demonstrate the tool. Set the file-size limit and dimensions to your destination's actual requirements.
- Open the example settings and select your photo. The link sets a 100 KB inclusive limit and exact dimensions of 413 px wide by 531 px high.
- Adjust the crop position, then choose ‘Make JPG’. Check that the result is at most 100,000 bytes and exactly 413 × 531 px.
- Use ‘View actual pixels’ to inspect detail and the crop, then save the JPG. Choose that saved JPG in the destination's upload picker.
Open the tool with these example settings
If the target is exceeded at these dimensions, check the file-size and pixel ranges allowed by the destination. Exact-dimension mode keeps the width and height you entered. In keep-original mode, you can select ‘Allow smaller dimensions if compression alone cannot meet the size limit’ and make the JPG again. Choose whether to allow resizing according to the submission requirements.
When the target is too small
PixelFit searches the JPG encoder's quality range from 10% to 100%. Large or complex photos can exceed the target within that range. Other compression methods may produce different results.
Raise the target or allow smaller dimensions if the destination permits it. Exact-dimension mode keeps your specified width and height. You can save a result that exceeds the limit, but it will still exceed that requirement.
Check the destination's photo rules
PixelFit does not assess background color, face proportions, capture date or retouching. It creates a new JPG, and original metadata and color profiles may change. Transparent areas become white. Animated WebP becomes a still image. Check the current rules of your destination, including any DPI requirement.
For Korean passport submissions, see the Ministry of Foreign Affairs photo guidance and official online photo check.
Korean passport photo guidance · Official online photo check
Share the same requirements
Copying the settings link includes the size, unit, limit and exact dimensions when set. It excludes the photo and file name. Crop position and permission to resize are chosen separately for each photo.
Open the photo tool